You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > ThinkTel Support > uControl FAQs > Fax - Adding a DID to fax loopback trunk
Fax - Adding a DID to fax loopback trunk
print icon

NOTE: The flag(Fax Line = True) is intended specifically for numbers that will be used for faxing, but numbers doing both faxing and voice calls, can be flagged as a fax line. What we wish to avoid is having voice-only numbers being flagged, as this uses up the fax routing resources.

 

To Enable or Disable a number as a fax line through ucontrol.thinktel.ca you have to…

  1. Open uControl
  2. Click on the blue "Services" Tab, then click "Numbers"
  3. Enter the number in the search or locate it in the list of all your numbers.
  4. Click the "Edit" button beside the number you want to be enabled as a fax line
  5. In the Fax Line field, change the status to True
  6. Click Save.

Click Management-->Dashboard to return to the main screen.

 

If you do a large volume of faxing, you might want to create a faxing trunk(or if you have one already). ThinkTel support can enable the whole trunk as fax, then when any new DID's are added to the trunk they are automatically flagged as fax lines.

If you are using your pilot for faxing then ThinkTel Support can enable on that line for you

 

We hope this info was helpful. If you have any problems or questions, please let us know. 

You can open a support ticket via http://thinktel.distributel.happyfox.com/new/ or you can contact us by phone at 866-928-4465 Options 1-3-1

 

Feedback
0 out of 0 found this helpful

scroll to top icon